Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery in a RAM 1500 Pickup?

Model: RAM 1500 MK 5, DT - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

In this tutorial, you will see how to replace the remote battery in a RAM 1500 pickup, a very simple and quick operation. For this, you will need a flathead screwdriver and, of course, a replacement CR2450 battery.

First, press the small button on the side and pull out the emergency key. Next, insert the screwdriver tip into the indicated slot, pry it open, and lift the rear cover. At this point, you can remove the old battery, using the screwdriver for assistance, and insert the replacement battery in the correct orientation.


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery in a RAM 1500 Pickup?
How to Replace the Remote Battery in a RAM 1500 Pickup?
RAM 1500 (2019-2026 / MK 5, DT) As seen in this tutorial, replacing the remote battery in a RAM 1500 pickup is a very simple and quick operation. For this, you will need a small fla…
How to Replace the Remote Battery on a Dodge RAM 1500
How to Replace the Remote Battery on a Dodge RAM 1500
RAM 1500 (2009-2019 / DS, DJ, MK 4) In this video tutorial, you can see how to replace the dead battery in the key remote for the Dodge RAM 1500 by following a few simple steps that wil…
How to Replace the Key Fob Battery for the RAM 1500
How to Replace the Key Fob Battery for the RAM 1500
RAM 1500 (2019-2026 / MK 5, DT) Here are the instructions for disassembling and replacing the battery in the key fob for the RAM 1500, in simple steps. First, take your key fob and …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos