Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear brake pads on the RAM 1500

Model: RAM 1500 DS, MK 4, DJ - Years 2009-2019
Part: Brake pads

Let's see in this short guide the instructions on how to disassemble and replace the rear brake pads of the RAM 1500. First we lift the car and start by disassembling and removing the rear wheel; then we go to lever inside the piston to make it retract, then unscrew the screws that we find on the rear part of the caliper to remove it, as shown in the video. At this point we remove and replace the brake pads with new ones, of excellent quality; we clean the caliper from residual dirt and reassemble the new brake pads correctly!

Posted on 4 March 2022 by ScegliAuto

Video tutorial

Related tutorials

Replace the RAM 1500 front brake pads
Replace the RAM 1500 front brake pads
RAM 1500 (2009-2019 / DS, MK 4, DJ) Let's see in this guide the main instructions that will allow us to remove and replace the front brake pads of the RAM 1500. First we lift the car an…
How do you replace the rear brake pads on the RAM 1500?
How do you replace the rear brake pads on the RAM 1500?
RAM 1500 (2009-2019 / DS, MK 4, DJ) In order to replace the rear brake pads of the RAM 1500 you have to go and lift the car, so that the wheel corresponding to the pads to be replaced i…
Replacing the brake pads on RAM 1500
Replacing the brake pads on RAM 1500
RAM 1500 (2009-2019 / DS, MK 4, DJ) We see in this video tutorial the replacement of the brake disc on a Dodge RAM 1500, model produced from 2009 until 2019. We immediately start by rem…

Other guides you may be interested in

How to Remove the Third Brake Light from a Renault Clio

In this video, we will see how to remove the third brake light from a Renault Clio. First, open the boot lid and remove the plastic rivets with a screwdriver, then close the boot. Extract the third brake light from the metal of the boot lid using your hands. Once the piece is removed from its housing, disconnect the power connector and attach the new third brake light. After fitting the bulbs, insert the piece back into the boot lid and secure it with the plastic rivets. Finally, check the correct operation of the lights after turning on the instrument panel.

Watch the video!


by ScegliAuto

More videos