Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. 1500
    4. : Where is the RAM 1500 fuse box located

RAM 1500 - Video tutorial

Model: RAM 1500 MK 5, DT - Years 2019-2024
Part: Fuse box
Operation: Where is the RAM 1500 fuse box located

Knowing the exact position in which the fuse box of your RAM 1500 (latest model) is located is very important as it allows anyone to be able to restore the correct functioning of the various electrical components of the car quickly and above all in safety. Once you have safely parked the car and switched off the engine, go to the driver's side and reach the lower area of the dashboard; just below the steering wheel. Remove the entire protective panel present and immediately behind you will finally have access to the various fuses. When finished, replace the panel.


Posted on 16 May 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Ram 1500 2009-2019 - Where is the fuse box located in the Dodge RAM 1500? Read Answer
    • Ram 1500 2002-2009 - What's wrong with the Dodge RAM 1500 fuse box? Read Answer
    • Ram 1500 1994-2001 - How to fix the faulty fuse box on the Dodge RAM 1500? Read Answer
    • Ram 1500 2002-2009 - What problems does the RAM 1500 fuse box have? Read Answer
    • Ram 1500 2009-2019 - What to do if the RAM 1500 cigarette lighter fuse fails? Read Answer
    • Ram 1500 2019-2026 - How to recognize a problem with the fuse box in the RAM 1500 pick-up? Read Answer
    • Ram 1500 2019-2026 - What can be the problem with the fuse box on the Dodge Ram 1500? Read Answer
    • Ram 1500 2009-2019 - What problems does the RAM 1500 fuse box have? Read Answer
    • Ram 1500 2019-2026 - How to fix a fuse box problem on the Dodge RAM 1500? Read Answer
    • Ram 1500 2019-2026 - What to do in case of malfunction of the fuse box in the RAM 1500 pick-up? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos