Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear light in the RAM Promaster van?

Model: RAM Promaster MK 1 - Years 2014-2022
Part: Tail light

As we can see in this tutorial, disassembling the rear light in the RAM Promaster van, so that you can replace the bulbs or the headlight itself, is an extremely simple and fast operation. First of all we open the tailgate, then we remove the black plastic panel placed along the inner edge of the headlight to be replaced. Once this is done, we unscrew the two fixing bolts with an 18mm socket wrench, pull the headlight towards us and extract it from the body. At this point we can proceed with the replacement of the damaged element, as needed.

Posted on 25 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the RAM ProMaster van?
How to reset the service in the RAM ProMaster van?
RAM Promaster (2014-2022 / MK 1) In this tutorial we can see how to reset the service in the RAM ProMaster van, an extremely simple and quick operation, to be carried out only once a…
How to replace the cabin filter in the RAM Promaster van?
How to replace the cabin filter in the RAM Promaster van?
RAM Promaster (2014-2022 / MK 1) In this tutorial we can see how to replace the cabin air filter in the RAM Promaster van. For this quick and easy operation we will only need a cross…
How to reset the partial odometer in the RAM ProMaster van?
How to reset the partial odometer in the RAM ProMaster van?
RAM Promaster (2014-2022 / MK 1) In this tutorial we can see how to reset the partial odometer in the RAM ProMaster van, an extremely simple and fast operation. This odometer can be …

Other guides you may be interested in

How to Replace the Radio in a Ford Focus

First, engage the handbrake and put the car in a low gear to prevent it from rolling during the replacement. Next, lift the bonnet to disconnect the battery cables and protect the electronic components. Unscrew the two screws located under the front panel of the stereo. Use a plastic lever to lift the bottom of the stereo. Disconnect the connector at the bottom and also remove the stereo lock at the back. Now, install the new stereo following the guides from the old one.

Watch the video!


by ScegliAuto

More videos