Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. Promaster
    4. : How to reset the service in the RAM ProMaster van?

RAM Promaster - Video tutorial

Model: RAM Promaster MK 1 - Years 2014-2022
Part: Checks and maintenance
Operation: How to reset the service in the RAM ProMaster van?

In this tutorial we can see how to reset the service in the RAM ProMaster van, an extremely simple and quick operation, to be carried out only once all scheduled maintenance work has been completed. Let's start by going inside the cabin, then we insert the key and turn on the instrument panel, not the engine. We then press the accelerator pedal all the way down three times in a row, restart the panel and verify that the operation was successful. If not, we repeat the procedure, making sure to complete it within ten seconds.


Posted on 28 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos