Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlights in a RAM 3500?

Model: RAM 3500 DS, MK 4, DJ - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
This video is currently unavailable

Replacing the headlights in a RAM 3500 is a very simple task. First, remove the front engine cover by disengaging the plastic clips.

Next, unscrew the two bolts securing the grille with a 10mm wrench and remove it. At this point, unscrew the two bolts securing the headlight using the same 10mm wrench. Then, disconnect the connector by disengaging the clip as shown in the video and proceed to install the replacement.

Finally, reassemble everything by following the reverse procedure.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Headlights on a Dodge RAM 3500
How to Replace the Headlights on a Dodge RAM 3500
RAM 3500 (1993-2002 / BR, BE, MK 2) In this guide, discover the steps to remove and replace the headlights on a Dodge RAM 3500. First, move to the front of the vehicle and start by remo…
How to Remove the Front Headlights on a RAM 3500 Pickup?
How to Remove the Front Headlights on a RAM 3500 Pickup?
RAM 3500 (2009-2019 / DS, MK 4, DJ) In this tutorial, you will see how to remove the front headlights on a RAM 3500 pickup, a very simple operation. First, open the hood and remove the …
How to Replace the Air Filter on a Dodge Ram 3500?
How to Replace the Air Filter on a Dodge Ram 3500?
RAM 3500 (2009-2019 / DS, MK 4, DJ) To replace the air filter on a Dodge Ram 3500, open the hood to access the engine compartment, as the air filter box is located inside. Specifically,…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos