Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the horn fuse located in the RAM 1500 pickup?

Model: RAM 1500 DT, MK 5 - Years 2019-2026
Part: Checks and maintenance

If the horn in your RAM 1500 pickup suddenly stops working, the first thing to do is check the status of the corresponding fuse. As shown in this video, it is located in the fuse box inside the engine compartment, right in front of the battery, and is labeled F42. Its amperage is 20A. If the fuse is blown, make sure to work with the vehicle off, use the provided pliers, and replace it with a spare of the same specifications; otherwise, you may damage the horn itself.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse diagram for the RAM 1500 pick-up truck?
What is the fuse diagram for the RAM 1500 pick-up truck?
RAM 1500 (2019-2026 / DT, MK 5) In this video we can see where the fuse boxes of the RAM 1500 pick-up are located and what are the respective diagrams, to consult in case we need to…
Where Are the Airbag Fuses Located in the RAM 1500 Pickup?
RAM 1500 (2009-2019 / DS, MK 4, DJ) In this video, you can see where the airbag fuses are located in the RAM 1500 pickup, which are the first elements to check in case of a malfunction …
How to Replace the Air Filter in a RAM 1500 Pickup?
How to Replace the Air Filter in a RAM 1500 Pickup?
RAM 1500 (2009-2019 / DS, MK 4, DJ) Replacing the air filter in a RAM 1500 pickup is a very simple task. First, obtain the correct replacement filter, which can also be purchased online…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos