Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear bumper of the Ram 1500?

Model: RAM 1500 MK 4, DJ, DS - Years 2009-2019
Part: Rear bumper

To be able to replace the rear bumper of the Ram 1500 you have to disconnect all the connectors connected internally, accessing the two rear wheel arches. Once the connectors have been detached, you can unscrew the bolts that fix the wheel arch internally, also unscrewing the bolts that secure it in the upper central part. Once all these bolts have been removed, the bumper can be detached from its housing and replaced with a new spare part. After the new bumper has been inserted, it will be possible to connect and fix it properly.

Posted on 12 September 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the rear bumper of the Ram 1500?
How do you remove the rear bumper of the Ram 1500?
RAM 1500 (2019-2026 / MK 5, DT) In order to replace the rear bumper of the Ram 1500 you have to go to the lower part of the car, disconnecting all the connectors connected to the de…
How do you replace the rear shock on a Ram 1500?
How do you replace the rear shock on a Ram 1500?
RAM 1500 (2009-2019 / MK 4, DJ, DS) In order to replace the rear shock absorber on the Ram 1500, you need to lift the vehicle so that the rear wheels are not in contact with the floor. …
Removal of the front bumper of the RAM 1500
Removal of the front bumper of the RAM 1500
RAM 1500 (2009-2019 / MK 4, DJ, DS) In this video tutorial we will see how to remove the front bumper of the RAM 1500, following the instructions below. First we open the bonnet and rem…

Other guides you may be interested in

How to Replace the Battery on a Volkswagen Polo

When your vehicle won't start and makes noises similar to electrical contacts, the cause is likely the battery. Release the bonnet using the appropriate lever and lift it to secure it with the prop rod. First, check the condition of your battery, then disconnect the terminals, starting with the negative one. Next, unclip the brackets securing the battery on both sides, then unscrew the bolts on the sides of the battery base to remove the brackets holding it in place. Install the new battery, and you're done!

Watch the video!


by ScegliAuto

More videos