Do it yourself
| ||||
|
RAM 1500 - Video tutorial
Model: RAM 1500
DJ, MK 4, DS
- Years 2009-2019 In order to replace the Ram 1500 engine oil, you need to loosen the bolt that secures the drain plug positioned in correspondence with the engine compartment in the lower part of the car. All the oil that will be released must be collected in a suitably positioned tray. When the liquid inside has escaped, the drain plug can be closed by accessing the engine compartment and inserting the new oil from the special filling hole. When all the necessary oil has been added, it will be possible to close the filler hole with the cap and lower the hood.
Posted on 15 September 2022 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.041
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |