Do it yourself
| ||||
|
RAM 1500 - Video tutorial
Model: RAM 1500
MK 4, DJ, DS
- Years 2009-2019 We lift the car onto a workshop bridge (or onto stands, if we really can't do otherwise) and locate the oil pan. We unscrew the plug to allow the used oil to drain out, which we will collect in a container and dispose of in compliance with current regulations. We unscrew the oil filter and replace it with a new one, making sure to also change the gasket. Finally, we top up with new engine oil. If we want, we can perform a complete service, also carrying out the other inspection interventions shown in the video.
Posted on 15 May 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.033
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |