Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Half Shaft on a Dodge Ram

Model: RAM 1500 DS, MK 4, DJ - Years 2009-2019
Part: Axle shaft

This video presents the procedure necessary to replace the half shaft on a Dodge Ram. As shown in the video, before starting the actual replacement of the half shaft, you must first remove the mounting bolt of the shock absorber and the connector of the sway bar to then remove the part that will be replaced. After removing this initial part, you can take off the ball joint of the upper control arm and then the tie rod end to insert a new shaft. At this point, the video shows how to insert the new half shaft and reassemble everything.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

RAM 1500 (2009-2019 / DS, MK 4, DJ) The fuse layout, or rather the fuse box, of Dodge Ram vehicles, specifically the 2016 Dodge Ram 1500, is an electrical diagram that allows you to eas…
RAM 1500 (2002-2009 / DM, D1, DH, DC, MK 3, DR) This video shows the location of the fuse boxes in the 2003 Dodge Ram 1500. In addition to the location of the fuse boxes, the video displays the dia…
RAM 1500 (2002-2009 / DM, D1, DH, DC, MK 3, DR) Replacing the rear bulbs on a Dodge RAM is very simple. Start by removing the interior light assembly; open the trunk and unscrew the Torx screws tha…

How to Open the Fuel Cap of the Volkswagen Jetta

When you need to refuel this vehicle, first open the fuel filler flap. Follow these simple instructions, and you can also watch the video for more details. First, unlock the central locking to open the flaps. Then, press the fuel cap with your hand to unlock it and open it. Underneath, you will find the fuel cap, which you need to unscrew counterclockwise. At this point, you can proceed to refuel.

Watch the video!


by ScegliAuto

More videos