Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Renault Captur?

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

See other generations:
Video tutorial

To replace the timing belt on a Renault Captur, lift the vehicle to access the bolts securing the front right wheel and the corresponding wheel arch. Once removed, locate the tensioner pulley underneath, which must be loosened to reduce the tension on the belt.

The belt can then be removed from its seat, allowing you to insert the new replacement part. Re-tension the belt by reinstalling the pulley and ensure everything is functioning correctly.


Updated on 24 October 2026 by ScegliAuto


Related tutorials

How to replace the timing belt on the Renault Captur?
How to replace the timing belt on the Renault Captur?
Renault Captur (2013-2019 / MK 1) To replace the timing belt on the Renault Captur, open the bonnet to access the components located inside the engine compartment: here you will find …
How to replace the timing belt on a Renault Captur?
How to replace the timing belt on a Renault Captur?
Renault Captur (2013-2019 / MK 1) To replace the timing belt on a Renault Captur, lift the car with a jack or ramp to loosen the bolts securing the front right wheel: once removed, de…
How to Reset the Service Light on a Renault Captur?
How to Reset the Service Light on a Renault Captur?
Renault Captur (2019-2026 / MK 2) The vehicle tested in the attached video tutorial is the 2020 Renault Captur, and now we will discover how to reset the service light. Before doing t…

Other guides you may be interested in

    Frequently Asked Questions

    • Captur 2013-2019 - How much does it cost to replace the timing belt in the Renault Captur 1.5 DCI? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos