Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the timing belt of the Renault Captur?

Model: Renault Captur MK 1 - Years 2013-2019
Part: Timing belt

In order to replace the timing belt of the Renault Captur, you need to lift the car with a jack or a lift, so that you can loosen the bolts that secure the right front wheel: once this is removed, you will need to detach the inner wheel arch, thus identifying the tensioner pulley. By completely removing it, you can reduce the tension of the belt, so that you can insert the new replacement piece; after the belt has been inserted, you will need to reinstall the tensioner roller, ensuring that everything is functioning properly.

Posted on 25 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Captur (2013-2019 / MK 1) To replace the timing belt on the Renault Captur, open the bonnet to access the components located inside the engine compartment: here you will find …
Renault Captur (2013-2019 / MK 1) In order to replace the timing belt of the Renault Captur, you need to lift the car so that you can loosen the bolts holding the right front wheel an…
Renault Captur (2019-2026 / MK 2) The vehicle tested in the attached video tutorial is the 2020 Renault Captur, and now we will discover how to reset the service light. Before doing t…

Other guides you may be interested in

    Frequently Asked Questions

    • Captur 2013-2019 - How much does it cost to replace the timing belt in the Renault Captur 1.5 DCI? Read answer
    • Captur 2013-2019 - How many kilometers to replace the timing belt on Renault Captur? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos