Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs in the Renault Scenic?

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Tail light bulb

In this tutorial we can see how to replace the rear headlights bulbs in the Renault Clio, a very simple and quick operation. First of all, make sure that the key is not inserted, then open the trunk door, locate the two bolts along the inner edge of the headlight in question and unscrew them using a Torx T20 key. Then grab the headlight, pull it towards you and separate it from the bodywork. At this point, all that remains is to disconnect the power connector, open the entire plate and replace the faulty bulb.

Posted on 1 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Headlight Bulbs on the Renault Scenic
Replacing the Rear Headlight Bulbs on the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) In this guide, follow the steps to remove and replace the rear headlight bulbs on the Renault Scenic. First, open the boot and start by removing the …
How to replace the rear headlight bulbs in the Renault Scenic?
How to replace the rear headlight bulbs in the Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) In this tutorial, we can see how to replace the rear light bulbs in the Renault Scenic, an extremely simple and quick operation. First of all, make s…
How to Replace the Rear Headlight Bulbs on Grand Scenic
How to Replace the Rear Headlight Bulbs on Grand Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) How to replace the rear headlight bulbs on Grand Scenic? Here's how to remove the headlight and replace the bulbs. Use a screwdriver to unscrew the s…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos