Do it yourself
Frequently asked questions about cars and motorcycles

Reset Service Light on a Renault Clio

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Warning light – error code

See other generations:
Video tutorial

This video shows how to turn off the service maintenance light on a Renault Clio. It's a very simple operation; enter the vehicle, turn on the instrument panel, and see the light illuminated. Turn off the instrument panel and press the fixed button near the car's speedometer.

Rotate the key to the 'on' position, then turn off the instrument panel again. When you turn it back on, the service light will be off. Finally, check the changes made to the car by turning the instrument panel on again.

Always remember to make adjustments to the onboard computer with the ignition off.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

Renault Clio (2019-2026 / Clio V, Clio 5) Good morning, today’s goal is to reset the "Service" light on your Renault Clio. Turn on the instrument panel by pressing the power button. Next, usi…
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…
Renault Clio (2019-2026 / Clio V, Clio 5) The procedure to reset the service light for a Renault Clio model 5 is straightforward and quick. First, turn on the instrument panel and then press …

    Frequently Asked Questions

    • Clio 2005-2013 - What does the flashing engine light on a Renault Clio III mean? Read answer
    • Clio 2005-2013 - What does the electrical fault warning light mean in the Renault Clio? Read answer
    • Clio 2012-2019 - What is the authentication code in a Clio and where is it located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos