Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery in a Renault Scenic Xmod

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Battery

See other generations:
Video tutorial

Open the front bonnet of the engine compartment. Locate the battery position; it is slightly to the right, in the centre of the engine bay, protected by a plastic cover as shown in the images.

Remove the cover and disconnect the electrical connections, then use a suitable spanner to unscrew the bolts securing it in place. At this point, you can remove the old battery and proceed to install the new one. Before installation, clean the electrode contacts.

Now fit the new battery following the reverse procedure shown in the images.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

Renault Scenic Xmod: Replacing Front Brake Pads
Renault Scenic Xmod: Replacing Front Brake Pads
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) In this video tutorial, you will learn how to replace the brake pads on a Renault Scenic Xmod. First, lift the vehicle and remove the wheel. Then, us…
How to remove the window switch control unit on the Renault Scenic III?
How to remove the window switch control unit on the Renault Scenic III?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) In this video, see how to remove the window switch control unit located in the driver's door of the Renault Scenic III. The same method applies to th…
How to Replace the Battery of the Renault Scenic XMod Mk3
How to Replace the Battery of the Renault Scenic XMod Mk3
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) This guide shows how to replace the battery of the Renault Scenic Mk3. First, open the bonnet and wait a few minutes for the vehicle's onboard comput…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos