Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Renault Scenic XMod Mk3

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Battery

This guide shows how to replace the battery of the Renault Scenic Mk3. First, open the bonnet and wait a few minutes for the vehicle's onboard computer to shut down; leave the keys outside the vehicle for safety. The battery is located on the right side of the vehicle; to access it, remove the plastic cover of the battery and the control unit. Remove the negative terminal and set it aside, then remove the rear cover of the battery. Disconnect the positive terminal from the battery and the rear connector, and remove the cable. Unscrew the two retaining bolts of the battery and extract the accumulator. Install the new unit and refit all parts in position. From inside the vehicle, reset the battery change warning light using the buttons on the left side of the steering wheel.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Scenic Xmod: Replacing Front Brake Pads
Renault Scenic Xmod: Replacing Front Brake Pads
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) In this video tutorial, you will learn how to replace the brake pads on a Renault Scenic Xmod. First, lift the vehicle and remove the wheel. Then, us…
How to Change the Battery in a Renault Scenic Xmod
How to Change the Battery in a Renault Scenic Xmod
Renault Scenic (2003-2009 / MK 2, Scenic 2) Open the front bonnet of the engine compartment. Locate the battery position; it is slightly to the right, in the centre of the engine bay, protected…
Where is the Battery Located in the Renault Scenic 3?
Where is the Battery Located in the Renault Scenic 3?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) The battery of the Renault Scenic model 3, produced from 2009 to 2015, is located under the front bonnet of the car. Specifically, the battery is und…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos