Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin air filter of the Renault Kangoo 2

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Cabin air filter

To ensure that clean air circulates inside the Renault Kangoo cabin, a filter has been installed on the intake that we must replace periodically. To do this, we open the hood of the engine compartment, remove the grille at the base of the windshield on the passenger side, remove the profile near the wheel arch, remove the weatherstripping section, lift and hold up the grille portion. Using a Torx tip, unscrew the two screws that secure the panel covering the filter box, with the same Torx, unscrew the screw that locks the filter cover, remove the old filter element, insert a new one, and reassemble the various components.

Posted on 11 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter in a Renault Kangoo?
How to Replace the Cabin Filter in a Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) The video explains how to replace the cabin air filter (or pollen filter) in a Renault Kangoo. The filter box is located near the passenger's feet an…
How do you replace the cabin filter in the Renault Kangoo 1?
How do you replace the cabin filter in the Renault Kangoo 1?
Renault Kangoo (1997-2008 / MK 1, KC, KW) Also the cabin filter of cars, here we specifically refer to the Renault Kangoo 1, is subject to periodic replacement, undoubtedly benefiting the qua…
How to Replace the Cabin Filter on the Renault Kangoo
How to Replace the Cabin Filter on the Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) If you own a first-generation Renault Kangoo (1998-2008) and want to learn how to replace the cabin air filter, read this guide carefully and follow …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos