Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the starter motor of the Renault Scenic 1.6

Model: Renault Scenic Scenic 1, MK 1, RX4 - Years 1993-2003
Part: Starter motor

This brief guide will explain the procedure for disassembling and replacing the starter motor of the Renault Scenic 1.6. First, we open the car's engine hood and start by disconnecting the battery terminals; then we unscrew the fixing screws of the starter motor found at the bottom, disconnecting the electrical wiring to remove it from the engine compartment, as shown in the video. At this point, we carry out the repair or replacement of the starter motor with the new one, securing it properly and finally reconnecting the battery!

Posted on 9 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Starter Motor on a Renault Scenic
Replacing the Starter Motor on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Replacing the starter motor on the Scenic? Disconnect the battery terminals before removing the starter motor. Unscrew the securing bolts of the star…
Where is and how to reach the starter motor fuse of a Renault Scenic?
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) Today we will focus on identifying and reaching the starter motor fuse of our Renault Scenic. To begin, we will need to open the front engine hood. O…
Where is the starter motor fuse located in the Renault Scenic 3?
Where is the starter motor fuse located in the Renault Scenic 3?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) When the starter motor of the Renault Scenic stops working, the cause could be the breaking of the fuse related to it. The starter motor fuse is loca…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos