Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the storage compartment in the Renault Fluence?

Model: Renault Fluence MK 1 - Years 2009-2019
Part: Glove compartment

In this tutorial we can see how to disassemble the storage compartment in the Renault Fluence, an extremely simple and quick operation. First of all, let's go inside the cabin, then we unclip the plastic trim above the compartment and unscrew all the indicated fixing screws using a Torx key. Then we remove the panel of the outer side wall of the dashboard, unscrew the additional screw and remove the compartment from the housing. At this point, all that remains is to insert the replacement, and reassemble everything following the reverse procedure.

Posted on 24 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the external rearview mirror of the Renault Fluence
How to disassemble the external rearview mirror of the Renault Fluence
Renault Fluence (2009-2019 / MK 1) If you own a Renault Fluence and want to learn how to properly remove the external rearview mirror, all you have to do is read the following guide ca…
How to disassemble the steering wheel in the Renault Fluence?
How to disassemble the steering wheel in the Renault Fluence?
Renault Fluence (2009-2019 / MK 1) In this tutorial we can see how to disassemble the steering wheel in the Renault Fluence, a very simple and quick operation. Before proceeding, disco…
Where is the OBD port located on the 2015 Renault Fluence?
Where is the OBD port located on the 2015 Renault Fluence?
Renault Fluence (2009-2019 / MK 1) If you have not been able to locate the OBD port inside your 2015 Renault Fluence, don't worry because in the following guide we will explain where i…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos