Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to perform the onboard computer test of the Renault Megane II

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Onboard computer

See other generations:
Video tutorial

Let's see how to perform a test on the onboard computer of the Renault Megane II: insert the card into its slot and press the start button, while also pressing the menu button, for five seconds. This way, the onboard computer enters test mode, and we can see the needles and lights performing an automatic calibration.

By pressing the button located at the end of the lever on the right side of the steering wheel, we can see the firmware version; pressing again tells us how many liters of gasoline are in the tank; with a subsequent press, we get information on how many liters/hour are passing through the injectors at that moment; with the next press, we will see the overall test result.


Posted on 30 April 2025 by ScegliAuto


Related tutorials

How to Enter the Radio Code on Renault Megane
How to Enter the Radio Code on Renault Megane
Renault Megane (2002-2010 / Megane 2) This guide shows how to enter the radio code after removing the battery on a Renault Megane. It’s a very simple operation. Enter the vehicle, turn on…
How to Change the Language on the On-Board Computer of a Renault Megane
How to Change the Language on the On-Board Computer of a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Today's guide will show you how to change the language on the on-board computer of a Renault Megane in simple and quick steps. First, get in the vehi…
Resetting the Service Light on the Renault Megane
Resetting the Service Light on the Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) This guide outlines how to reset the service light for the routine maintenance oil change on the Renault Megane. First, get into the vehicle and turn…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos