Do it yourself
Frequently asked questions about cars and motorcycles

Where is the OBD port located in the Renault Clio 2019?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Checks and maintenance

If you want to easily and independently locate the OBD port inside the cabin of your Renault Clio Mk4 (2019), you must follow all the steps described below. First, enter the car and make sure it is turned off, then proceed to remove the small plastic cover located at the bottom of the central dashboard, specifically at the small glove compartment. Once you have removed the plastic cover in question, you finally have access to the OBD port of your Renault Clio and you are done.

Posted on 2 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2019-2026 / Clio V, Clio 5) If you own a Renault Clio Mk5 and want to find out where the vehicle's OBD port is located, all you have to do is read the following guide and follow…
Renault Clio (1998-2005 / Clio 2, MK 2) In this guide for all Renault Clio Mk2 owners, discover the steps to locate the OBD port in just a few seconds. First, enter the vehicle and ensure i…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) If you own a Renault Clio Mk4 (2014) and want to find the OBD port to connect a diagnostic tool, simply read the following guide carefully and follow…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 1998-2005 - Where is the heater resistor located on the Renault Clio mk2? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer
    • Clio 2005-2013 - What to do if the Renault Clio horn does not work? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos