Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Renault Kangoo?

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Service warning light

It will be possible to make the Service light disappear from the instrument panel of the Renault Kangoo by inserting the ignition key into the corresponding slot, so that it can be turned to turn on the instrument panel. Once the instrument panel is turned on, you can hold down the button located at the end of the lever to the right of the steering wheel. By holding it down, the Service light will start flashing until it completely disappears and the maintenance interval is reset. To verify that the reset has been done correctly, you will need to reactivate the instrument panel.

Posted on 15 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Renault Kangoo
How to Reset the Service Light on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Manually resetting the service light on your first-generation Renault Kangoo (1997-2008) is very simple. Follow these steps to complete the operation…
How do you reset the Service light on the Renault Kangoo?
How do you reset the Service light on the Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) It will be possible to completely eliminate the Service light that is shown on the instrument panel of the Renault Kangoo by inserting the ignition k…
How to Reset the Service Light on a Renault Kangoo
How to Reset the Service Light on a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this article, learn how to reset the service light on a Renault Kangoo 2nd generation. The procedure is the same for other Renault models produced…

Other guides you may be interested in

    Frequently Asked Questions

    • Kangoo 2007-2021 - Why does the Renault Kangoo service light come on? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos