Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of a Renault Megane key?

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Key

See other generations:
Video tutorial

To change the battery of a Renault Megane key, start by extracting the emergency mechanical key. You can do this by pressing the small release button on the side of the key. Once extracted, you will notice a small groove along the edge of the remote.

Carefully insert a thin object, such as a small screwdriver, into the groove and lever to open the key shell in two halves.

Locate the battery inside, taking note of the exact position and polarity to avoid mistakes. Remove the old battery and insert the new one, making sure it is positioned correctly.

Finally, close the key by joining the two halves of the shell and make sure it is securely closed.


Posted on 1 June 2025 by ScegliAuto


Related tutorials

How to Change the Key Fob Battery of a Renault Megane
How to Change the Key Fob Battery of a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) How do you change the key fob battery of a Renault Megane? Let's see in this detailed video how to do it. Take the key fob and, using your fingers (t…
How to Change the Key Battery on the Renault Megane
How to Change the Key Battery on the Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) In this tutorial, you can see how to change the battery in the Renault Megane remote control by following a few simple steps that will allow you to w…
How to change the key battery of a Renault Megane 3?
How to change the key battery of a Renault Megane 3?
Renault Megane (2008-2015 / Megane III, Megane 3) Although the key for the Renault Megane 3 resembles a card more than a traditional car remote, the method for replacing the internal battery remains …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos