Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire anomaly warning light in the Renault Clio 4?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part:

The anomaly warning light in question will turn on when the tire pressure value is lower than required, as detected by the sensors installed in the tires, even if this only affects one of the aforementioned tires. The cause must be verified and any issues such as punctures, air leaks from the valve, etc. must be fixed. Then the warning light must be reset, and a video tutorial here can help us do that. Turn on the instrument panel and hold down the Set button, noting that the Tire Pressure message on the onboard computer will flash and then turn off.

Posted on 11 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the Renault Clio
How to reset the tire pressure warning light on the Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) The ignition of the tire pressure warning light signals an anomaly in the pressures on one or more tires; before resetting the light on the Renault C…
How to reset the tire pressure warning light on the Renault Clio 5
How to reset the tire pressure warning light on the Renault Clio 5
Renault Clio (2019-2026 / Clio V, Clio 5) If on the display of the instrument panel of your Renault Clio Mk5 you notice that the tire warning light remains on after each start, it means that …
How to reset the tire pressure warning light (TPMS) of the Renault Clio
How to reset the tire pressure warning light (TPMS) of the Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) Today we will see how to reset the tire pressure warning light (TPMS) of the Renault Clio; before performing the reset, it is necessary that all four…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos