Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : Disassembly and replacement of engine spark plugs

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Spark plugs
Operation: Disassembly and replacement of engine spark plugs

Open the front hood and make sure it is supported safely. It is advisable to carry out this operation with the engine cold. Remove the plastic engine cover: the 4 spark plugs are located at the bottom, just below the windshield. Release the plug connected to the pipette by pressing the relative fastening lock; unscrew the fastening screw of the pipette and remove it from its seat. With the appropriate key, unscrew and remove the old candle; fit the new spark plug into the wrench, screw it manually into its seat and finally tighten not excessively. Reposition the relative pipette by screwing the fixing pin and reconnect the socket. Proceed in the same way for the other candles.


Posted on 28 June 2023 by ScegliAuto



How to replace the spark plugs on the Renault Scenic Rx4
Renault Scenic (1996-2003 / ) The replacement of the spark plugs is a maintenance that can easily be done by yourself; once the engine has cooled down, open the hood and start by
Replacing the spark plugs of the Renault Scenic.
Renault Scenic (2003-2009 / MK 2, Scenic 2) Below we will see the procedure useful for disassembling and replacing the engine spark plugs of the Renault Scenic, following the instructions below
Car spark plugs change
Renault Scenic (1996-2003 / ) the guide shows how to correctly change the car spark plugs. First of all, it is necessary to disconnect the couplers of the caps located above the s

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos