Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the cabin fan resistor of the Renault Modus?

Model: Renault Modus MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Blower motor

Video tutorial

In order to replace the resistor of the cabin fan of the Renault Modus, you will need to remove the glove compartment located on the passenger side of the dashboard: this can now be opened so that the hooks inside can be detached. Then you will need to locate the fan inside the dashboard and the resistor located near it: you will need to disconnect it to remove it from its seat.

This way you can insert the new one and reassemble the glove compartment that has just been removed.


Posted on 1 July 2025 by ScegliAuto


Related tutorials

How to replace the cabin fan of the Renault Modus
How to replace the cabin fan of the Renault Modus
Renault Modus (2004-2013 / MK 1) Today's instructions will allow us to disassemble and replace the cabin fan of the Renault Modus. First, we get on board the cabin and start disassem…
How to Remove the Glove Compartment and Cabin Fan on a Renault Modus
How to Remove the Glove Compartment and Cabin Fan on a Renault Modus
Renault Modus (2004-2013 / MK 1) Here are the steps to remove and replace the glove compartment and cabin fan on a Renault Modus. First, get inside the vehicle and open the glove com…
Dismantle the Cabin Ventilation Fan on a Renault Modus
Dismantle the Cabin Ventilation Fan on a Renault Modus
Renault Modus (2004-2013 / MK 1) How to dismantle the cabin ventilation fan on a Renault Modus? After removing the fabric trim under the glove compartment with a lever, unscrew the s…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos