Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the diesel filter on the Renault Trafic II

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Diesel fuel filter

In this video, we see how to change the diesel filter on the Renault Trafic II: inside on the left, we find it, and to remove it, we disconnect the electrical connector, detach both tubes, and at this point we can lift the filter, removing it from its housing, placing it in a container for liquid recovery. We unscrew the cap, remove the cover and detach the filter cartridge from the flange, levering with a flat screwdriver. We remove the o-ring and clean the flange with brake cleaner and absorbent paper, then we place the new filter, put the new o-ring in place, which we will lubricate well before positioning it. We put the cap back in place and then position the filter back into the engine compartment, reconnecting the electrical connector and tubes, and it's done.

Posted on 28 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the diesel filter of the Renault Trafic
How to change the diesel filter of the Renault Trafic
Renault Trafic (2014-2026 / MK 3) In this video, we will see how to change the diesel filter of the Renault Trafic: we open the hood and equip ourselves with a T30 hex key; the filter…
How to change the diesel filter on a Renault Trafic II
How to change the diesel filter on a Renault Trafic II
Renault Trafic (2001-2014 / MK 2) In this video we will see how to change the diesel filter on a Renault Trafic II: the filter is located under the hood, on the left side of the engin…
How to replace the diesel filter of the Renault Trafic 3
How to replace the diesel filter of the Renault Trafic 3
Renault Trafic (2014-2026 / MK 3) Today we will explain how to replace the diesel filter of the Renault Trafic model 3. The filter box is located behind the engine, so in order to rep…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos