Do it yourself
Frequently asked questions about cars and motorcycles

How to change the diesel filter on a Renault Twingo II

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Diesel fuel filter

See other generations:
Video tutorial

Let's see how to change the diesel filter on a Renault Twingo II: we can find the new filter for example on Auto-doc. It with the code F 026 402 081 at the price of 26.67 euros + 9.95 euros for shipping. The diesel filter is located in the upper left part of the engine compartment: with a flat screwdriver we press the colored part of the connector of each tube, and then unhook it. Loosen the filter fixing screw with a 10 socket wrench and remove the old filter; insert the water sensor into the new filter, aligning the pins and rotate it clockwise to lock it, then tighten the fixing screw; reposition the diesel inlet/outlet tubes and then bleed the air through the pump located near the filter, until it becomes firm; loosen the bleed screw to release the air; when diesel starts to come out, we can screw it back in. Start the car leaving it idling for a couple of minutes, in order to check for leaks.

The old filter must be taken to an authorized collection center for disposal.


Posted on 16 August 2025 by ScegliAuto


Related tutorials

Renault Twingo (2007-2014 / Twingo 2) To replace the diesel filter of the Renault Twingo, you need to open the hood so that you can access the components located inside the engine compart…
Renault Twingo (1993-2007 / Twingo 1) In this brief guide, you will see the entire procedure, step by step, for replacing the fuel filter on a Renault Twingo, first generation model produ…
Renault Twingo (1993-2007 / Twingo 1) To replace the fuel filter on a Renault Twingo, start by unscrewing the fuel filler cap. Raise the vehicle on a ramp (or from the rear), and using a …

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos