Do it yourself
Frequently asked questions about cars and motorcycles

How to permanently deactivate the Start&Stop system on the Renault Megane

Model: Renault Megane Megane IV, Megane 4 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Checks and maintenance

See other generations:
Video tutorial

Below we will see the necessary information in order to permanently deactivate the Start&Stop system on the Renault Megane. In order to permanently deactivate the Start&Stop system, it is necessary to use a specific diagnostic software, to be connected to the OBD port of the control unit; therefore, turn on the instrument panel to allow the dialogue.

At this point, select the brand and model of the car, then go to the Start&Stop parameters to deactivate the operation of this system; finally, disconnect the tool and verify the successful operation.


Posted on 2 October 2025 by ScegliAuto


Related tutorials

Renault Megane (2015-2023 / Megane IV, Megane 4) Today, we will guide you through the steps to permanently disable the automatic Start&Stop ignition system in the Renault Megane. First, get inside t…
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, we can see how to permanently disable the start & stop function using the OBD port and a laptop with the DDT4ALL software. This modifi…
Renault Megane (2015-2023 / Megane IV, Megane 4) In this brief guide, discover how to activate and deactivate the Start&Stop system in the Renault Megane in simple steps. First, get in the vehicle a…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the internal temperature sensor located in the Renault Megane? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos