Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Timing belt

Remove and replace the timing belt on a Renault Clio: lift the car on a column lift or jack (if necessary, remove the front wheel, using a screwdriver to detach the right wheel arch liner). Once these operations are completed, lift the engine bonnet, remove the engine soundproofing panel and the timing belt cover (plastic or metal). Using a spanner, loosen the tensioner pulley and slide the belt off its seat, then use a socket to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump (previously removed), the tensioner, and the belt itself, tightening everything with the socket. Finally, fit the rivets with the wheel arch liner and reassemble the wheel.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the timing belt on the Renault Clio 1.2
How to replace the timing belt on the Renault Clio 1.2
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The following steps will illustrate how to dismantle and replace the timing belt on the petrol Renault Clio 1.2. First, raise the vehicle and start b…
Guide to Replacing the Timing Belt on the Renault Clio 1.2
Guide to Replacing the Timing Belt on the Renault Clio 1.2
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today we will discover the instructions to remove and replace the timing belt on the petrol Renault Clio 1.2. First, open the bonnet and begin to dis…
Replacement of the timing belt of the Renault Clio 1.5 dCi
Replacement of the timing belt of the Renault Clio 1.5 dCi
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Below we will discover the information that will illustrate the procedure for dismantling and replacing the timing belt of the Renault Clio 1.5 dCi. …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos