Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the front brake pads of the Renault Twingo II

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Brake pads

See other generations:
Video tutorial

In this video, we see how to change the front brake pads of a Renault Twingo II: with the car turned off, we open the hood and the brake fluid reservoir cap, then we lift the front of the car and remove the wheels. Using a screwdriver, we retract the piston in the brake caliper, then we unscrew the caliper bolt and rotate the caliper upwards, then we remove the pads from the disc.

We clean the caliper with a metal brush, grease the outer part of the new pads with copper grease and position them; we put the caliper back in place and also put back the caliper bolt. We do the same on the other side and then reassemble the wheels and lower the car: operation completed.


Posted on 18 November 2025 by ScegliAuto


Related tutorials

How to Remove the Front Bumper on a Renault Twingo
How to Remove the Front Bumper on a Renault Twingo
Renault Twingo (2014-2024 / Twingo III, Twingo 3) Below are the instructions needed to remove and replace the front bumper on a Renault Twingo. First, raise the vehicle at the front and start unscrew…
How do you replace the front headlight bulb of the Renault Twingo?
How do you replace the front headlight bulb of the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) In order to replace the headlight bulb of the Renault Twingo, you need to open the hood so that you can access the components inside the engine compa…
How to disassemble the front headlight of the Renault Twingo
How to disassemble the front headlight of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) Today we will discover the instructions that will allow us to disassemble and replace the front headlight of the Renault Twingo. First of all, we ope…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos