Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock on the Renault Megane?

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Clock

It will be possible to adjust the clock displayed on the central dashboard of the Renault Megane by inserting the ignition key into the corresponding slot: once the key is inserted, you can turn on the ignition and press and hold the SOURCE button located on the lever to the right of the steering wheel. You can then use the buttons to decrease and increase the volume to change the hours; by pressing and holding the SOURCE button again, you can switch to adjusting the minutes, which can be confirmed by holding the SOURCE button once more after finishing.

Posted on 8 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock in the Renault Megane 3?
How do you set the clock in the Renault Megane 3?
Renault Megane (2008-2015 / Megane 3, Megane III) If suddenly we notice that the clock is not updated in our Renault Megane 3, the car shown in the video, it is probably because we touched the power …
How to adjust the clock of the Renault Megane 2
How to adjust the clock of the Renault Megane 2
Renault Megane (2002-2010 / Megane 2) Setting the time on a Renault Megane model 2 vehicle is a very simple and quick operation to perform independently, thanks to our short video tutoria…
How do you set the clock of the Renault Megane?
How do you set the clock of the Renault Megane?
Renault Megane (2002-2010 / Megane 2) In order to adjust the clock of the Renault Megane, you need to insert the ignition key into the slot, so that you can turn on the instrument panel: …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos