|
Do it yourself
| |||
| ||||
If our Renault Kangoo won't start, the problem might be a fuse.
Model: Renault Kangoo
MK 2, FC, FW
- Years 2007-2021
If our Renault Kangoo won't start, it may simply be a blown fuse. If the starter motor makes no noise; the car does not respond electrically (the instrument panel remains off or the lights are very dim); the starter does not turn, or it turns but the engine does not start. The fuse box in the cabin is often the most relevant for starting problems: on the cover of each box, there is a diagram indicating which fuse protects which circuit. Let's look for "starter motor" or "fuel pump"; we can remove the relevant fuses and examine them to see if the internal filament is blown or just slightly blackened. We should replace it with one of the same color and amperage, taking it from our supply (it’s always a good idea to keep a spare supply in the car). If the fuse blows again after replacement, then the problem is deeper: there is a short circuit, and a mechanic is needed. The fuses to check are F30/F6 (starter motor), F3/F8 (fuel pump), and F2 (ECU power supply). All of these are in the cabin fuse box located under the dashboard. We should also check the maxi-fuse located in the engine compartment fuse box: it provides general protection for the starting circuit (F4).
Posted on 19 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Renault Kangoo
(1997-2008 /
MK 1, KC, KW)
The Renault Kangoo is a commercial vehicle dating back to the 1990s but is still present on the roads today. If you own one, you may have encountered…
Renault Kangoo
(1997-2008 /
MK 1, KC, KW)
Today we will see how to replace a fuse inside the visible fuse box located in the front hood of the 2002 Renault Kangoo. The fuse box is located nex…
Renault Kangoo
(2007-2021 /
MK 2, FC, FW)
Often, the malfunction of the electrical system and components in our Renault Kangoo is due to a blown fuse. To check and possibly replace it, it is …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.433
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |