Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Renault Scenic

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Headlight bulb

See other generations:
Video tutorial

How to replace the front headlight bulb on a Renault Scenic. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Disconnect the refill tube of the windscreen washer reservoir; locate the inspection cap of the headlight and (located at the rear of the headlight) remove it. At this point, you will find the bulbs with metal clips, pull out the bulb holder from the headlight and extract the damaged bulb with the help of a screwdriver.

Install the new bulb (always of the correct type and size) and insert the bulb holder into the headlight housing. Close the headlight with the inspection cap and reconnect the refill tube of the reservoir.

Test the correct operation of the lights.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Renault Scenic
How to Replace the Front Headlamp Bulb on a Renault Scenic
Renault Scenic (1996-2003 / ) Before starting, open the bonnet of your Renault Scenic. First, unclip and remove the rear cover of the blown bulb. Next, unclip the clip that secure…
How to Replace the Headlight Bulb on a Renault Scenic
How to Replace the Headlight Bulb on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Before you begin, open the front bonnet of your Renault Scenic. Start by removing the blown bulb from its housing in the headlamp by turning the bulb…
How to Replace the Dipped Beam Bulb on a Renault Scenic X-Mod
How to Replace the Dipped Beam Bulb on a Renault Scenic X-Mod
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To replace the dipped beam bulb on a Renault Scenic X-Mod, start by checking the bulb to be replaced. Go to the back of the headlamp, remove the plas…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos