Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the R-Link of the Renault Austral?

Model: Renault Austral MK 1 - Years 2022-2026
Part: Checks and maintenance

It will be possible to perform the reset operation of the R-Link on the Renault Austral by turning on the instrument panel and inserting the ignition key into the corresponding lock. At this point, you can press and hold the power button of the central screen for a few seconds. The button will be located on the right side of the screen, and after a few seconds of holding the button down, you will notice that a secret menu will appear: from there, you can select the option to reset to factory settings, which must be selected to complete the process.

Posted on 2 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Renault Austral's R-Link?
How do you reset the Renault Austral's R-Link?
Renault Austral (2022-2026 / MK 1) .. In order to reset the R-Link of the Renault Austral, you need to turn on the instrument panel by inserting the ignition key into.. …
In the Renault Austral, how do you reset the partial odometer?
In the Renault Austral, how do you reset the partial odometer?
Renault Austral (2022-2026 / MK 1) To perform some checks, for example the distance traveled from a certain location to a certain destination or something else, we can reset the partia…
How do you reset the Service light on the Renault Austral?
How do you reset the Service light on the Renault Austral?
Renault Austral (2022-2026 / MK 1) On the instrument panel of the Renault Austral, it will be possible to make the Service light disappear by turning on the instrument panel, inserting…

How to Remove the Spark Plugs from a Volkswagen Up

How to remove and replace the spark plugs on a Volkswagen Up? Follow these steps for proper removal. Pull the lever to open the engine compartment and lift the front bonnet, securing it in place. Remove the plastic soundproofing panel on the cylinder head, then disconnect the power connectors using a screwdriver after unscrewing them with a socket wrench. Pull off the coils by hand and unscrew the spark plugs with the socket wrench, finally pulling them out of the cylinder head. Take the new spark plugs and guide them into the engine head using the extension of the socket wrench. Finally, tighten the spark plugs securely and reconnect the respective power connectors. To finish: reassemble the soundproofing panel and close the engine bonnet. - Socket wrench with sockets - Flat or screwdriver bits - Battery-powered screwdriver - Protective gloves.

Watch the video!


by ScegliAuto

More videos