Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port of the Renault Trafic 2 located?

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Checks and maintenance

Thanks to the brief procedure described in the following guide aimed at all of you who own a second-generation Renault Trafic, you will be able to easily locate the OBD port inside the vehicle. First, reach the driver's seat and ensure that the car is turned off, then shift your attention to the lower area of the dashboard, specifically underneath the steering wheel. At this point, remove the small protective cover present to gain access to the OBD port you were looking for. If necessary, connect a diagnostic tool.

Posted on 6 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD Port on the Renault Trafic?
Where is the OBD Port on the Renault Trafic?
Renault Trafic (2014-2026 / MK 3) In this guide, we will help you locate the OBD port located inside your third-generation Renault Trafic in just a few seconds. It is a simple yet imp…
How to Locate the Fuse Box and Fuse Diagram in the Renault Trafic
How to Locate the Fuse Box and Fuse Diagram in the Renault Trafic
Renault Trafic (2001-2014 / MK 2) In this video, you will learn how to locate the fuse box and fuse diagram in the Renault Trafic. Starting from the issue with the cigarette lighter l…
How do you reset the Service light on the Renault Trafic?
How do you reset the Service light on the Renault Trafic?
Renault Trafic (2001-2014 / MK 2) To reset the Service light of the Renault Trafic, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on the…

Other guides you may be interested in

    Frequently Asked Questions

    • Trafic 2014-2027 - Where is the inertia switch located in the Renault Trafic van? Read answer
    • Trafic 2014-2027 - Why does the Start and Stop of a Renault Trafic not work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos