Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on a Renault Trafic 1.9 dCi

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Timing belt

Today’s main instructions will allow us to remove and replace the timing belt on a Renault Trafic 1.9 dCi. In this specific case, the engine is removed from the chassis to work on a bench; then disconnect the V-belt and remove the crankshaft pulley, followed by removing the timing cover, as shown in the video. At this point, take the necessary references for replacing the timing belt, installing the new original one; subsequently, also replace the water pump kit, following the video tutorial until the end!

Posted on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the starter motor of the Renault Trafic 2.5 DCI
Renault Trafic (2001-2014 / MK 2) Let's see together the steps on how to disassemble and replace the starter motor of the Renault Trafic 2.5 DCI, following the instructions below. Fir…
How do you replace the timing belt on Renault Trafic?
How do you replace the timing belt on Renault Trafic?
Renault Trafic (2014-2026 / MK 3) In order to replace the timing belt on the Renault Trafic, you need to unscrew the bolts that secure the front bumper of the vehicle and the entire f…
Guide to replacing the battery of the Renault Trafic 1.6 dCi
Guide to replacing the battery of the Renault Trafic 1.6 dCi
Renault Trafic (2014-2026 / MK 3) Today we will discover the instructions that will allow us to disassemble and replace the battery of the Renault Trafic 1.6 dCi. First, we open the v…

Other guides you may be interested in

    Frequently Asked Questions

    • Trafic 2014-2027 - When to replace the timing chain in the Renault Trafic van? Read answer

How to Clean the Injectors on BMW 3 Series

Let's see how to clean the injectors on BMW 3 Series with the appropriate cleaning kit. Lift the hood and secure it with the prop rod, then disconnect the fuel supply hose that leads to the injectors. Connect the pressure gauge and the cleaning kit to the fuel lines; start running the cleaning fluid from the previously connected kit through the fuel lines of the injectors (repeat this process several times). Disconnect everything and start the engine. Reinstall the fuel line leading to the injectors after cleaning them of any dirt and deposits.

Watch the video!


by ScegliAuto

More videos