Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Renault Trafic

Model: Renault Trafic MK 3 - Years 2014-2026
Part: Timing belt

To replace the timing belt on a Renault Trafic, you need to unscrew the bolts securing the front bumper and the entire front grille, allowing easy access to the internal components of the engine bay. Here, you can unscrew the bolts securing the pulleys around which the belt is located, on the left side of the engine block: once the old belt is removed, you can position the new one, tightening the pulley nuts again. After installation, reattach the front bumper.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on a Renault Trafic 1.9 dCi
Replacing the Timing Belt on a Renault Trafic 1.9 dCi
Renault Trafic (2001-2014 / MK 2) Today’s main instructions will allow us to remove and replace the timing belt on a Renault Trafic 1.9 dCi. In this specific case, the engine is remov…
How to remove the alternator from the Renault Trafic
How to remove the alternator from the Renault Trafic
Renault Trafic (2001-2014 / MK 2) This guide shows how to replace the alternator on the Renault Trafic. Using a Torx key, unscrew the two screws securing the bumper, located in the wh…
Replacing the Alternator on the Renault Trafic
Replacing the Alternator on the Renault Trafic
Renault Trafic (2001-2014 / MK 2) Follow these main instructions on how to remove and replace the alternator on the Renault Trafic, as well as the Opel Vivaro. First, open the bonnet …

Other guides you may be interested in

    Frequently Asked Questions

    • Trafic 2014-2027 - When to replace the timing chain in the Renault Trafic van? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos