|
Do it yourself
| |||
| ||||
How to Replace the Timing Belt on the Renault Trafic II
Model: Renault Trafic
- Years 2001-2014
Video tutorial
Detailed instructions - Today, see how to replace the timing belt on the Renault Trafic II model 1.9. To start the replacement safely, disconnect the battery. Lift the front of the vehicle on a jack and remove the right front wheel. Remove the engine cover and the right wheel arch liner. Unscrew the auxiliary belt tensioner to loosen and remove it, using a ratchet spanner. Unscrew and remove the upper right engine mount and the metal bracket. Remove the front and upper timing covers. Using a 20mm Torx key, unscrew the bolt of the crankshaft pulley, then rotate the engine clockwise until the mark on the camshaft pulley aligns with the notch on the rear cover. Insert the crankshaft locking pin and manually rotate the engine until the crankshaft locks at Top Dead Centre. Remove the central bolt and take off the pulley. Disconnect the radiator hose and loosen the nut of the tensioner float, then unscrew the water pump screws. Install the new pump and fit the new belt tensioner. Insert the belt and tighten it. Remove the camshaft locking pin to allow it to position. Refit the covers and reverse the steps to lower the vehicle.
Posted on 4 October 2026 by ScegliAuto
Related tutorials
Renault Trafic
(2001-2014 /
MK 2)
Today’s main instructions will allow us to remove and replace the timing belt on a Renault Trafic 1.9 dCi. In this specific case, the engine is remov…
Renault Trafic
(2014-2026 /
MK 3)
To replace the timing belt on a Renault Trafic, you need to unscrew the bolts securing the front bumper and the entire front grille, allowing easy ac…
Renault Trafic
(2001-2014 /
MK 2)
This guide shows how to replace the alternator on the Renault Trafic. Using a Torx key, unscrew the two screws securing the bumper, located in the wh…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Recline the Rear Seats in a Renault Kwid?
In this tutorial, see how to fully recline the rear seats in a Renault Kwid, a very simple and quick operation to increase space in the trunk. To do this, first enter the vehicle and open the hatch. Then, remove the upper panel and locate the two metal hooks on both sides of the seatback. Next, unlock both by pulling towards you and push the seat forward, lowering it completely. To return the seatback to position, simply pull it towards you and secure it to the two hooks. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.892
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |