|
Do it yourself
| |||
| ||||
Reasons Why the Renault Master Won't Start, but the Engine Turns Over, and Displays the "Injection Fault" Message
Model: Renault Master
MK 3
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
In this video, you will see a Renault Master that turns over but does not start. It also displays the message "Injection Fault". The reasons can vary, starting with the fuel system: the fuel pump may be faulty. Pay attention if you do not hear the buzzing of the lift pump, and check the diesel pressure with a gauge (300/400 bar). Another reason could be a dirty filter, which blocks the flow of diesel, or a weak battery, which turns the engine but does not provide power to the pump or the ECU. Other issues may involve the injectors, which can be dirty or clogged: the test can only be performed by a workshop, as can checking the ECU that does not receive the synchronisation signal, or pressure loss in the common rail pipes. You can check the fuses and wiring of the fuel pump with an OBD tool: the error you might find is P0087.
Posted on 24 March 2026 by ScegliAuto
Related tutorials
Renault Master
(1997-2010 /
MK 2)
On board the Renault Master, in order to carry out the replacement of the starter motor, it will be necessary to lift the vehicle using a jack or a b…
Renault Master
(2010-2023 /
MK 3)
From the display of the Renault Master, you can completely eliminate the Service light shown on the instrument panel by turning the key in the igniti…
Renault Master
(2010-2023 /
MK 3)
To reset the service light on a Renault Master vehicle, follow these steps: Start the car and ensure the display shows the total mileage. Press and h…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.110
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |