Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Boot Dimensions of the Renault Arkana

Model: Renault Arkana MK 1 - Years 2019-2026
Part: Checks and maintenance

In this video, we can see the capacity of the boot of the Renault Arkana: the minimum capacity with the rear seats up is 480 litres, while the maximum capacity with the rear seats down is 1,260/1,300 litres. The width between the wheel arches is 1,000/1,050 mm, while the length, up to the front seats, with everything down is 1,700/1,750 mm. The height from the floor to the shelf is 400/450 mm. Therefore, utilising all the space, it acts like a small van and you can really transport anything. If we decide to sacrifice the front passenger seat as well, we have a truly enormous space available.

Posted on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service and tire pressure on the Renault Arkana.
How to reset the service and tire pressure on the Renault Arkana.
Renault Arkana (2019-2026 / MK 1) In the Renault Arkana, to reset the maintenance warning after an oil change, park the Renault Arkana and turn on the instrument panel without startin…
How to remove the rear headlight of the Renault Arkana
How to remove the rear headlight of the Renault Arkana
Renault Arkana (2019-2026 / MK 1) To successfully disassemble one of the rear lights of your Renault Arkana on your own, you must follow the procedure described in our new guide. Firs…
Where is the spare wheel located in the Renault Arkana?
Where is the spare wheel located in the Renault Arkana?
Renault Arkana (2019-2026 / MK 1) To replace the spare wheel of the Renault Arkana, open the boot to access the components in the luggage compartment: here, lift the carpet that serve…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos