|
Do it yourself
| |||
| ||||
Engine Oil and Filter Change on Renault Kangoo 2
Model: Renault Kangoo
MK 2, FC, FW
- Years 2007-2021
Let's see how to change the oil and filter on a Renault Kangoo 2: open the bonnet, remove the oil cap to improve oil flow, lift the front of the car and place it on axle stands. Locate the sump bolt and let it drain into a container. Dispose of the used oil properly at an authorised centre, along with the filter. From above, move the coolant reservoir to make space, then unscrew the oil filter located near the engine block using a socket. Put a bit of new oil on the seal and screw it in by hand, tightening half a turn after the seal touches, reassemble the coolant reservoir and put a new bolt on the drain. Lower the car, add about 90% of the recommended amount of new oil, start the engine for 30 seconds to circulate the oil in the filter, turn it off, wait a minute, and check the oil level, adding a little at a time until reaching the "max" level, but never exceeding it.
Posted on 17 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Kangoo
(1997-2008 /
MK 1, KC, KW)
In this brief video, you will see how to change the engine oil and oil filter on your Renault Kangoo. It is not a complex task; just be careful and y…
Renault Kangoo
(1997-2008 /
MK 1, KC, KW)
This video clearly shows how to change the engine oil in a Renault Kangoo. If you want to proceed with this DIY maintenance, gather the right tools, …
Renault Kangoo
(1997-2008 /
MK 1, KC, KW)
In this video tutorial, you will learn how to replace the engine oil and oil filter on a Renault Kangoo 1.2 Petrol. First, lift the vehicle and remov…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.171
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |