Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulbs on the Renault Kangoo II 2013

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Tail light

Let's see how to change the bulbs on the rear light of a Renault Kangoo II up to 2013 (the one shown in the video) because the arrangement of the lights on the tailgate changes afterwards. This video is also suitable if we do not have parking sensors on the bumper. Open the tailgate: on the inside of the light (the part near the tailgate hinge), you will see two Torx T20 screws that you need to unscrew; gently pull the light towards you until it releases. At the back, turn the bulb holder counterclockwise and change the bulb, taking care not to touch the glass with your fingers. Then reassemble everything.

Posted on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulbs in a Renault Kangoo?
How to Replace the Rear Light Bulbs in a Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this tutorial, you will learn how to remove the rear lights in a Renault Kangoo and replace the bulbs, a very simple and quick operation. First, e…
How to replace the rear lights in the Renault Kangoo van?
How to replace the rear lights in the Renault Kangoo van?
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this tutorial we can see how to replace the rear lights in the Renault Kangoo van, an extremely simple and quick operation. First of all, make sur…
How to Replace the Rear Light Bulbs on a Renault Kangoo
How to Replace the Rear Light Bulbs on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Below are the instructions that will allow you to remove and replace the rear light bulbs on a Renault Kangoo. First, open the rear doors of the vehi…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos