Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil in the Renault Kadjar?

Model: Renault Kadjar MK 1 - Years 2015-2022
Part: Engine oil

To comfortably carry out all operations related to changing the engine oil in the Renault Kadjar, it is advisable to lift the car on a ramp or on axle stands. However, the oil change can also be performed without lifting the car, although the entire operation is more cumbersome. To begin, after positioning yourself under the vehicle, remove the protective cover from the bottom of the engine and then proceed to drain the oil sump. Meanwhile, you can also replace the filter, then close the sump and reposition the cover. Now, simply add new engine oil to your vehicle.

Posted on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Gear Knob on a Renault Kadjar
How to Remove the Gear Knob on a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Before you begin, sit in the driver's seat of your Renault Kadjar. Start by prising off and removing the upper section of the gear knob, then repeat …
How to Reset the Oil Warning Light on the 2016 Renault Kadjar
How to Reset the Oil Warning Light on the 2016 Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) To manually and completely free reset the oil warning light on your Renault Kadjar, follow these steps. First, insert the key and turn on the instrum…
How to Reset the Service and Oil Change Lights on the Renault Kadjar?
How to Reset the Service and Oil Change Lights on the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) To reset the Service and Oil Change lights on the Renault Kadjar, turn on the ignition and navigate through the menu using the directional buttons on…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos