Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the speedometer from a Renault Twingo Mk2?

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

If you want to replace the speedometer on your Renault Twingo Mk2, follow the steps shown in this video to see how simple it is to do it yourself. First, remove the faulty speedometer, which can only be done by taking off the plastic panel above it. This gives you access to the two screws of the speedometer.

After removing the screws, detach the speedometer itself and disconnect the plug at the back. To install the new one, simply connect the plug first, then position the speedometer, replace the screws, and reattach the plastic panel.


Posted on 13 September 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of the Renault Twingo?
How to Remove the Rear Bumper of the Renault Twingo?
Renault Twingo (2014-2024 / Twingo III, Twingo 3) To remove the rear bumper of the Renault Twingo, loosen the screws securing the piece to its housing. These screws will be located at the bottom of t…
Where to Find the OBD Port on a Renault Twingo 2
Where to Find the OBD Port on a Renault Twingo 2
Renault Twingo (2007-2014 / Twingo 2) Locating the OBD port on your Renault Twingo Mk2 (2007-2014) is very simple, and with the instructions in this guide, you will have no difficulty. Fi…
Where is the internal fuse box of the Renault Twingo 2?
Where is the internal fuse box of the Renault Twingo 2?
Renault Twingo (2007-2014 / Twingo 2) In this guide, discover where the internal fuse box of your Renault Twingo Mk2 is located. It will only take a few seconds if you follow the instruct…

    Frequently Asked Questions

    • Twingo 1993-2007 - Where is the OBD port on the Renault Twingo located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos