|
Do it yourself
| |||
| ||||
How to set the clock in the Peugeot Trafic 2 second series?
Model: Renault Trafic
- Years:
2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Video tutorial
The main reasons for needing to adjust the clock in your car are essentially two: switching from daylight saving time to standard time and vice versa, or a temporary disconnection of the car's power battery, which causes the clock to reset. For the Peugeot Trafic 2 second series, as seen in the video of the instrument cluster, here’s how to proceed: turn on the instrument cluster, press the first button at the top of the right-hand lever on the steering wheel, wait for the hours to flash, and adjust using the + and - buttons of the radio volume. Use the same procedure for the minutes.
Posted on 20 November 2026 by ScegliAuto
Related tutorials
Renault Trafic
(2001-2014 /
MK 2)
Today we will explain how to adjust the clock of the instrument panel and onboard computer of the Renault Trafic independently. To set the clock, we …
Renault Trafic
(2014-2026 /
MK 3)
In order to adjust the clock of the Renault Trafic, you need to turn on the instrument panel by inserting the key into the corresponding slot: once t…
Renault Trafic
(2001-2014 /
MK 2)
To adjust the clock on a Renault Trafic, turn on the instrument panel by inserting the ignition key and turning it in the corresponding lock: once th…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Where is the battery located on the Aprilia Scarabeo 250ie scooter?
This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.114
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |