Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radio in a Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Car stereo

See other generations:
Video tutorial

Work with the car turned off. Insert the two special double needles into the four holes at the corners of the radio, ensuring they are fully inserted. Pull them simultaneously to extract the radio.

Disconnect the antenna cable, then the yellow connector for the steering wheel controls (press the tab and pull, never pull on the wires), and finally the black and white connectors. The new radio you purchased should also come with a frame: pass all the cables through it and insert it into place.

Connect everything to the new unit, including connectors and antenna, and insert your new radio.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Removing the Radio from a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Remove the original radio from a Renault Clio. Use the original metal keys (Aftermarket) to detach the stereo. Insert the keys into the holes on eith…
How to enter the radio code on a Renault Clio 4?
How to enter the radio code on a Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In the Renault Clio 4, the radio code is entered using the keypad on the left side of the radio. Buttons 1 to 4 are used to input the four digits of …
How do you replace the radio of the Renault Clio?
How do you replace the radio of the Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The replacement of the Renault Clio car radio can be done by levering with an object in order to detach the central dashboard covering around the rad…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos