Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on a Renault Megane 2

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Cabin air filter

To create workspace, open the front passenger door. Detach the lower plastic on the pillar, next to the foot mat, by pulling it from the outer side (door side). Open the glove compartment and then use a lever to detach the plastic from the side dashboard, where you will find the airbag deactivation switch. Disconnect the connector of this switch. Unscrew the 6 T20 Torx screws that secure the glove compartment and remove the door. Next, remove the lower part of the compartment and pull the white cover of the pollen filter, from which the filter itself will also come out.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter on the Renault Megane 2
How to replace the cabin air filter on the Renault Megane 2
Renault Megane (2002-2010 / Megane 2) The cabin air filter on the Renault Megane mk2 model is located inside the cabin, specifically under the passenger side glove box. To replace the cab…
Replacing the Cabin Air Filter on a Renault Megane
Replacing the Cabin Air Filter on a Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) Today, we will look at the instructions that will allow us to replace the cabin air filter on a Renault Megane in simple steps. First, get inside the…
Replacing the Cabin Air Filter on a Renault Mégane 3
Replacing the Cabin Air Filter on a Renault Mégane 3
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, learn how to remove and replace the cabin air filter on a Renault Mégane third generation by following these simple steps. First, loca…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos