Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Fog Light Bulb on Renault Laguna

Model: Renault Laguna MK 3, Laguna III, MK III, X91, Laguna 3 - Years 2007-2015
Part: Fog lights

Let's see how to remove the bulb from the fog light of the Renault Laguna. Locate the light unit at the bottom of the bumper and start the removal process. Pry off the plastic cover with a plastic lever (under the front bumper). Once the fog light cover is removed, take out the bulbs and replace them with new ones of the same size and voltage. Refit the bulb holder to the fog light connector. Turn on the instrument panel and switch on the fog lights. After testing, you can refit the protection under the front bumper.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Dipped Beam Bulb on a Renault Laguna 3?
How to Change the Dipped Beam Bulb on a Renault Laguna 3?
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) This is one of the most common methods used for changing the dipped beam bulb on a Renault Laguna 3. If you decide to change the headlight bulbs your…
Replacement of the front fog light bulb of the Renault Laguna
Replacement of the front fog light bulb of the Renault Laguna
Renault Laguna (1994-2001 / MK 1, Laguna 1, X56) These short and simple steps will show us how to disassemble and replace the front fog light bulb of the Renault Laguna. First, let's move to the fro…
How to Change the Air Conditioning Bulb on the Renault Laguna 1
How to Change the Air Conditioning Bulb on the Renault Laguna 1
Renault Laguna (1994-2001 / MK 1, Laguna 1, X56) In this video, we will see how to dismantle and replace the bulb of the air conditioning display on the first series Renault Laguna, following these …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos